irockasterisk: How to set the concurrent calls limit on SIP trunk in Asterisk?

Method2 (preferred): Looking at cons of using call-limit, I decided not to use it even though I found it to be really easy implementation. Similar goal can be achieved via the use of GROUP() and GROUP-COUNT() functions available in Asterisk Dialplan. You don’t have to make any adjustments on SIP Trunk configuration for call limit […]

RouterTech • View topic – VOIP ( SIP ) with Speedtouch 516v6 6.2G

FIXED the answer is the following Line Command :connection unbind application=SIP port=5060 :service host add name=VoIP mode=server :service host rule add name=VoIP protocol=udp baseport=5060 portrange=5060-5061 :service host rule add name=VoIP protocol=udp baseport=16384 portrange=16384-16482 :service host assign name=VoIP host=192.168.1.2 log=disabled :nat tmpladd intf=Internet type=nat outside_addr=0.0.0.1 inside_addr=192.168.1.2 protocol=udp :saveall :system reboot then having the ATA Device on […]

» Blocking Asterisk hacking/scanning attempts with fail2ban

Warning – if you follow these instructions fail2ban will, by default, be protecting you against other scans such as ssh attempts. This means though that if you get your IP blocked you will not be able to connect to your server from that IP. Ensure that you whitelist your IP by following the instructions at […]

Asterisk Gui

Not sure if your like me, but command line is all good, but gui is alot faster. Here is a list of procedures to install Asterisk-Gui on a running clean install of Asterisk. You can also check out my other HowTo for installing FreePBX v2.7 + Asterisk 1.6.2 on a fresh Linux CentOS 5.4 Dated April […]